TRU TURN - Musclecar Steering Components

An upgraded steering system that includes:

Steering Arms – designed to correct bumpsteer AND allow clearance for up to a 10" wide wheel with a 5.75" backspacing.

Forged Draglink – bolts in place of oem draglink to relocate the inner tierod end to minimize bumpsteer

Tie Rod Assemblies – integrates with your new steering arms and centerlink to provide a tru "no fab" bolt on steering system.

What will this system do?

This UPGRADE kit is designed for use with RideTech Tall Spindles.  The early Camaro/Nova frontends have very poor suspension geometry...the tires lean outward around turns, the bumpsteer is bad, and there is little room to run a wide wheel because of the oem steering arm interference with the inside of the wheel. The Tru Turn system resolves ALL these issues...the tires now lean INTO the turn, the bumpsteer is UNDER .050" through 5" of suspension travel, and you now have clearance to run up to a 10" wide wheel with a 275mm tire!




1968-74 NOVA Tru Turn Upgrade Package

SKU: 11169525